aua668

Hi, Whatever it calculates in the CPAN (84.8 kg per pax) it does load only 84 kg into the flight sim. See this thread: majesticsoftware.com/forums/discussion/539 Rgds Reinhard

in Pax Weights issue Comment by aua668 September 2019

Hi JP, Thanks for sharing your template. Very useful. For empty weight and operating weight: Majestic did not completely follow the SDK by moedelling this delta weight as normal payload (although you will find this also in other aircrafts done…

in CPAN loading of Q400 - minor inconsistencies Comment by aua668 September 2019

Hi JP, Thanks for your valuable input. The 600 kg additional payload weight in FSM exists, as it's defined in that way in in the aircraft definition file of the Q400. Have a look into the aircraft.cfg. In the [WEIGHT_AND_BALANCE] section you will…

in CPAN loading of Q400 - minor inconsistencies Comment by aua668 September 2019

Hi, I assume, you have triggered XFILL on the wrong FMC. You must trigger XFILL on the receiving FMC (and not the one containing the flightplan). Rgds Reinhard

in XFill deletes flight plan. Comment by aua668 September 2019

Hi, Search function is in the meanwhile working again: majesticsoftware.com/forums/discussion/comment/1516#Comment_1516 Rgds Reinhard

in Q400F?? Comment by aua668 September 2019

Hi JP, Some questions to your more detailled load sheet. First the maximum numbers for OA, OB, OC and OD are different to the older sheet and are not matching the max numbers in the control panel. Is this a special airline configuration you are r…

in PAX weights Comment by aua668 September 2019

Hi, You could use FS Real Time to set date and time (even from a remote PC via WideFS). Rgds Reinhard

in How do you set the clock date and time Comment by aua668 September 2019

Hi, Have you correctly setup your controls (ailerons, rudder, etc.)? Do you have conflicting assignments (simulator, FSUIPC, Q400)? Rgds Reinhard

in Landing difficulties Comment by aua668 August 2019

Hi, In the provided VariablesMap.xlsx file you find under the Caution&Warning tab the following remark: "The individual caution light outputs are currently not provided, since the simulators built so far were using the vector screen of the…

in variable lights panel warning / caution and cas messages Comment by aua668 July 2019

Hi, Have you checked this thread to be sure, thatthis is not your problem? majesticsoftware.com/forums/discussion/311/q400-ctd Rgds Reinhard

in CTD Problem Comment by aua668 December 2018

Hi, You have a crosswind situation. Wind coming from the side is compensated to follow the planned course. So nothing special. Rgds Reinhard

in Dash and Course Comment by aua668 November 2018

Hi, I finally got it working. I did it the brute force way: I installed the Q400 on the remote PC. Then I started the earlier copied CPAN (not the just installed). I then asked for additional access via the firewall and added two rules: TCP + UDP…