kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
Providing that you are using the correct installer then your issues should be corrected.
-
The Q400 uses a different sound processing system so, it may be a conflict. Glad to hear you got it going.
-
Have you looked at your sound card's configuration to ensure that is it properly configured for 2.1 or 5.1 depwnding on what type of sound setup you have as this to can have an effect where by sound is not heard or does not sound correct..... Jus…
-
The issues you speak of sound indicative of protection issues. * The aircraft must be installed using Administrator Rights by right-clicking on the installer and choosing Run as Administrator. * Install the aircraft to its intended path. * Be…
-
Hello Julian, Your issue does seem a bit odd, as simply changing to a different airport with the Q400 loading should not cause your instrument displays to become un-powered. Now you did mention that you were changing to a default aircraft then b…
-
@IBOMiles The aircraft was released with this logic in place from day one. Taxiing the aircraft is and has always been permissible with the control/gust lock engaged as it ought to be. * When the control/gust lock is engaged the aileron func…
-
The Q400 is a standalone product and does not require fsuipc usage. There however are many users that use both without issue.
-
No it is not... At this time only Active Sky
-
A few threads that may be of assistance http://majesticsoftware.com/forums/discussion/comment/2031#Comment_2031 http://majesticsoftware.com/forums/discussion/comment/1526#Comment_1526 http://majesticsoftware.com/forums/discussion/comment/11…
-
If you have something called the Immersion Manager, then close it when using the Q400 as it seems to cause peculiar behavior which has been reported to the developers of ChasePlane/Q400 Immersion.
-
There very likely may be a third party influence causing this. Are you running the Q400 without any other addons?
-
I am sure it can, but you would have to configure it I guess
-
The issue has been there from the beginning but more noticeable in the P3D platform.
-
http://majesticsoftware.com/forums/discussion/comment/3693#Comment_3693
-
When in the flight deck use the right mouse button and select the view Tha you would like to see. Give that a try. Keep us posted. Thanks
-
When folks express disappointment with the Q400's functionality, I hope that most are aware that some of the items requested are specific "options" that the operator(s) have installed based upon needs for the type of operations they perform, and of …
-
Several weeks ago I spoke briefly with the owner of the Aurasim site and there was some rearrangement being conducted with the ISP. I am not sure if everything has been resolved regarding this matter. I do know that Covid did pose some challenge…
-
* Out of interest is this happening when running the simulator standalone (no addons running along with it). * Have you tried to bind the controls using P3D's controls as a test. Be sure to disable the FSUIPC logic so there is no conflict.
-
Gents, Thanks for the info. While doing some testing of the product before it was released I did not encounter any issues using a tablet (4th Gen iPad) or networked PC. I do have a Tab S that I use for work, so I'll see if I can get it from the o…
-
Hello Mark, Kindly drop a line to our Support department via email with the details listed. Thanks
-
I am not at a pc currently to elaborate but take some time and review a few videos, many of which are available online. There are even UNS manuals online which can assist in your quest. While we are all here to help, there has to be some input…
-
Are you executing the proper procedure to have VNAV capture the constraints correctly? This is what those who are trying to help are asking.
-
I will have a look to see if we can replicate.
-
We thank all of you who provided us with ideas/suggestions. We will review the discussions and make a determination as to which items may be feasible contenders for implementation for future updates/enhancements. Also bear in mind that there are…
-
@canadagoose said: I did reinstall the aircraft a while back though. Is it possible this version is not compatible with P3Dv5? Regards If you had the v4 edition of the Q400, then there should be a download for v5 from the vendor f…
-
Good news... Thanks for the update. Finding the issue sometimes can be like looking for a needle in a haystack. Cheers
-
Thanks for the update, we would have to review the logic to see what the behavior would/should be based on the sequence of events that you explained. Cheers
-
@Jax_in_BC said: Santa, what I really, really want for Christmas, is to have the the Q400 send haptic feedback through the direct input api of P3D, to an haptic enabled controller. (aka, force feedback). It would be really cool to feel the eff…
-
Thanks, keep us posted.
-
I can suggest if you have not already done so, rename the fsuipc.ini and let the sim rebuild a new one and reconfigure to see if that may make a difference.