kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
The PILOT Edition which you have purchased only allows for the virtual cockpit. the PRO Edition allows the use of 2D panels. http://majesticsoftware.com/mjc8q400/products.html Cheers
-
Well for those who are disappointed or think that we are joke regarding the number of flight plans allowed to be stored in the FMS, there is not much I can do or say to appease you high expectations. While we here at Majestic do the best to make th…
-
Hello, With a rather vague breakdown of the pedals you use, and no other substantiating information one can assume that your runway overruns may also be attributed to poor executing of you landing/taxi techniques (simply put, a Dash 400 if landed…
-
English as mentioned by the previous poster is our preferred method of communication, however we'll make an attempt to assist. Sorry to hear that your installation is not going is smoothly as it was intended to be. Assuming that you just recentl…
-
OBS Warning? Are you/he getting/seeing connectivity i.e. 5 green bars, or at this particular time are you just seeing one blue bar on the SC connection tool? An OBS warning may usually be indicative of not having the correct mode selected. th…
-
If I recall they did not operate Q400's, but maybe you can reach out to one of the many talented repainters in the community. They may surprise you. Cheers
-
thanks for the update Cheers
-
Be sure verify that your have entered the email that you used with the purchase of the Q400. If you continue having problems then I suggest that you contact us via our support email. Cheers
-
FSX or P3Dv4?
-
Thank you for the heads up Mike, much appreciated
-
That's more like it. There are days that we may not agree on stuff, but amidst of it all we can re-group and get back on track. Thank you gents Cheers
-
Ok this needs to stop right here and right now. If we have nothing pleasant to say or offer assistance if even it may seem like it should not be necessary to you simply say nothing. Futher posts of such or any unpleasant remarks will be subjec…
-
Folks good morning, First things first. The 125 Hz configuration is something that we did implement for the PRO version of the Q400 due to P3D's sluggish input device response. Guenther, I would suggest that since your mjc84.ini is now d…
-
The log is created when there is a problem preventing the Q400 from loading correctly. Have you researched repairing your Direct sound functionality within your operating system as this seems to be you possible issue.
-
F2 and F3 move the power levers gradually allowing for incremental adjustments which would be best for initial takeoff power. The Q400 is not like an Airbus where to you just push it into the takeoff detent. The sound of the detent click is no…
-
Assigning your throttle quadrant to hit that detent would be the best way to do this. Unless you have a Q400 TQ then hitting that detent may not be possible but you could make a mark on your TQ to indicate where that detent would be. Also in t…
-
Richard, We have not changed the logic for pitch trim or any other flight Control interface. There could very easily be a conflict with your setup which may be causing issues. The only things that I can suspect causing issues without seei…
-
Welcome to the Majestic Software forums. We have a fairly well rounded group of users in this forum who are always more than willing to provide assistance to issues that new users may have. However, in order for this to be accomplished effective…
-
You have just exposed you credentials to the entire viewing audience. The reason the 64bit may not be installing is because you are attempting to use the credentials for your 32 bit installation. Search you emails or the vendor from which you …
-
May we get a route or a video to see what it may be that is not working in your favor?
-
I am going to go on a limb here, but did your Windows 10 go through an update recently. I was slightly perplexed a few days ago with my Simulation platform a few days ago as well when all of my sound setting seemed to be readjusted or missing in so…
-
Also have you applied the latest update?
-
I have run a few checks to see if I can replicate your issue, but I am unable to . Is it possible to provide a video of you changing to a different panel state to show the issue?
-
Has your Windows 10 been updated which could have very well affected the operation of the Q400 within the P3D platform. Un-install and then re-install the aircraft (be sure to backup any files to avoid loosing any changes that you may have made.
-
Have you applied the latest patch?
-
Are you intensuonally wanting to use the 2dpanels. The shift key plus numbers 1 thru 9 will provide multiple 2d panels
-
Primarily because the PRO edition is not has not been programmed to facilitate the functions which you are trying to achieve. The training edition will be more suited to these requirements. Kindly contact us via our Support email for addi…
-
Good day, Overstressing youe engines as you mention can have an adverse effect overtime but it's not going to pop up and smack you in the face. Engine failures are not a part of the pro edition, but are designed for the training edition o…
-
There are many topics that have been discussed regarding sound issue. Perform a search to see if one of the discussion fits the problem you are having. Also in order for help to be provided you'll have to provide a bit more information as we hav…
-
Good to hear every one is seeing positive results. Thank you all for your patience and assistance in pinpointing the issue. Cheers