kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
http://majesticsoftware.com/forums/discussion/504/area-support-and-its-functions/p1
-
When the installations become exhausted, then simply write to us via our Support email with your full name and credentials used for the purchase of the PILOT or PRO Edition, along with an explanation as to why your installations have been exhausted.…
-
http://majesticsoftware.com/forums/discussion/comment/481#Comment_481
-
Are you pointing the installer to the correct version of the platform that you plan to use the Q400 in? If you are using FSX SE, then be sure to point the installer to FSX: SE's location, and upon doing so the Q400 the mjc8q400 root folder should…
-
Since you have both FSX and FSX: SE installed; are you pointing the installer to the correct version of the the platform that you plan to use the Q400 in? If you are planning to use FSX SE, thenbe sure to point the installer to FSX: SE's locatio…
-
For ALL simmers interested in getting their hands on the Q400 : Simmarket has it discounted. https://secure.simmarket.com/majestic-software-dash-8q-400-pro-edition-64bit-p3d.phtml?fbclid=IwAR2IPTLo8v8hWVu8iTKFWeM3YAsat-YxyLry8weWi8ow5phZ8IOzAOv4…
-
It is not documented as such, but DeHavilland/Bombardier during flight testing did not see it being advantageous to have the autofeather engaged for landing. During takeoff the workload can be relatively high and the autofeather is designed to assi…
-
Hello Loius, Sales of the Q400 are usually run via the vendors which are licensed to sell the Q400, which unfortunately are not very often. Cheers
-
@fredoesfly said: went thru most of tutorial check list..after pushback, I could not steer with nosewheel using rudders or spoilers. We have modeled the Q400 to operate similar to that of the real aircraft, so the use of rudder pedals wi…
-
Hello Max, When we switched over to the 64 bit platform we had to restructure much of the code, and in so doing had to make several changes including the new format which unfortunately has made your custom work nonfunctional. We sincerely …
-
You are also able to use the F2 key for incremental advancement and F3 for incremental bringing them back down through the ranges to fuel cutoff.
-
The pushback sequence for the Q400 can be initiated from the FMS (No need for GSX or the newly released UGCX which by the way is not compatible with the Q400 as yet). Simply go to DATA page then SERVICES and you should then see the pushback featu…
-
In addition, have you been sure to configure your input devices via the Control panel as this is pertinent to ensure proper functionality of your axii in relation to the aircraft.
-
Not necessarily, but are you using P3D or FSUIPC to control your joystick device axii, if so how are they configured, or are you using the mouse/keyboard.
-
Providing us with some additional information regarding your setup could be beneficial in allowing us to figure out what may be causing your issue. Cheers
-
Unfortunately no. Your PRO license can only be used with the PRO edition. You will have to use your PILOT Edition if you choose not to have the blown tire simulation. Cheers
-
Modify the FSX/P3D units setting to feet+inches, or feet+millibars
-
Ok thanks for the update
-
From images I have seen the power out feature may work with a marshaller if not parked at a gate.
-
I will attempt to reach out to the owner of Aurasim, no promises since you have not gotten a response from their portal.
-
Its not a Q400 issue as such as the developer of UGCX has advised that there are some issues with the Q400 which I would not doubt since our FDM has been developed outside of the simulation platform. I too have un-installed UGCX as it is useless …
-
Yes you are both correct, I corrected the errors so that anyone else reading would not be confused .... The joys of corresponding via cell phone and not taking the time to proof what I wrote. Thanks and cheers
-
***> Sorry for joining this thread late but I have a dummy question: what's and where's the EADI? @FraPre The EADI is the abbreviation for Electronic Attitude Director Indicator. The EADI is the top instrument on the PFD which dis…
-
Have you tried to uninstall them reinstall the aircraft using administor rights.? Or have you attempted to update your graphic drivers.? I don't recall seeing an issue of this nature before. Keep us posted. Cheers
-
The need to uninstall and reinstall is not necessary, how could you provide some additional information. Some suggestions Airport... Complex or default. Have you tried another airport to se if the issues follows? Terrain Mesh... N…
-
What are explaining as the cold and dark configuration does not seem correct. Are loading the cold and dark script via the control panel (CPAN)? In this configuration, the majority of the switches are in the off position. However you desire the …
-
Folks, We have had a few users in the past who experienced the same issues, and what we observed was that of the lighting effects used/selected via third party programs like REX's Texture Direct, etc. had an effect on the taxi lights not illumin…
-
We have not done any tests using ivao lately but we never issues with gear retraction similar to what you mention. Will have to have another look when time permits. Thanks for querying the issue. Cheers
-
Hello Hinshee, The 32bit version of the Q400 is version 1.020b which is in installer in your account. Cheers
-
When the control lock is engaged it prohibits the movement of the ailerons, and you are correct the yoke will not move once the control lock is engaged. However. if you are using the yoke for ground steering, it will still operate normally even …