kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
The PRO Edition as you are well aware does not have "POWER PLANT & FLIGHT CONTROL" failure functionality......BUT users are able to create their own scripts which will allow for one to fail engines or any other system of their choice. There i…
-
Kindly write to our Support department regarding your issue. be sure to include all of your purchase details. Thank you
-
@PropLover , How goes it? Have not forget you or given up on you amidst of our busy schedules. I have been trying to replicate your issue with a few payware add-ons. While I do not have the scenery in question that you are having issues with I…
-
Hello Jack, Kindly check in with us via our Support email. Cheers
-
The search function has been restored to normal operation
-
This should help for future issues. http://majesticsoftware.com/forums/discussion/75/wx-radar-freezes-sim We have been working in the past with REX/Milviz to make the Weather Radar add-on compatible with the Q400, but there are a few snags that …
-
We too want to have the issue rectified sooner than later, and hopefully plan to have it up within a month or so. It will require us taking the forum down, which is something we don't want to do at the present moment.
-
Good to hear you rectified the issue, as I was going to advise, based on your image, that your fuel values needed to be switched. Happy Flying, Cheers
-
Had not given it any thought, but we could possibly see what is feasible down the line.
-
@Scorpio said: And we are now at the very end of AUGUST.... the search still does not work! Are you really trying to solve this issue or has it been "forgotten" ? While it is a priority to get it back up and running my previous post di…
-
@Scorpio The previous response was specifically written that way as I have no tolerance for disrespectful individuals, I don't care who your are or claim to be. at times there may be a language barrier issue which can make a post come across a ce…
-
Are you experiencing this issue while interacting directly with the Q400, OR may you be using a attempting to use the LVARs with your homebuilt input devices? We need to rule out the fact the problem is in fact your Q400, but if it is attempt to s…
-
I am currently out of the country dealing with a family emergency. When I return I Wil dig deeper into this. We thank you for your patience
-
I am unable to comment as I am not familiar with the tool that you are using, but it is interesting. Usually the fix of issues of this nature would be to reinstall the Q400
-
Unfortunately for some users, a windows 10 update seems to corrupt the Q400. We need to get back into finding out why it affects some users and not others.
-
@megab22..... You would use one set of of the two port, I. E. 49200, and you fellow pilot would use the other I. E. 49210.
-
The most common issue between two parties is that if of the required ports is not opened. Another issue at times is that some ISPs do not give users full control of making changes to their routers. Unfortunately, we have not been able to initi…
-
Thank you for the heads up. CTDs upon exit we have seen on a rare occasion, and there have been a few reports of this issue here on the forums or over at avsim that we are aware of. 1. Are you experiencing this everytime upon shut down? …
-
I currently don't own EGLL but it would be interesting to see if anyone who owns the scenery in the forum experiences the same issue when attempting to load that specific airport. @PropLover said: I have been able to get it to run a cou…
-
@Jetmagic said: one question, from the minute power is applied and nose gear steering off the aircraft wants to veer to the left. The real Q400 has a free castering nose gear system which can allow the use of asymmetrical thrust and …
-
What will work for one Edition will work for others, shared cockpit could pose a challenge, but until the product is looked into one can not really tell.
-
@PropLover said: * I was unfortunately not able to find this error log file in either the P3D or Q400 base folders. Sounds like the error file is not being created as the CTD seems to be happening before the aircraft is loaded …
-
Contacting our Support department via email would be the way go. Cheers
-
..
-
.
-
* Kindly make sure that the required ports have been opened for both you and your shared cockpit partner. The port numbers that are being used between the both you should the port numbers that you opened. One of you will use one set, and the other…
-
We'll have to look at that again, but some changes had to be made to the sound processing in one of the earlier versions of P3D (version 3.3 if I recall) as there was a conflict with a feature of the SIM. Cheers
-
* There is an error log which should be located in in the P3D v4.x root directory "CMJC84BaseErr.log". Simply email this if one has been created and email it to our Support department, and attach this thread in the email. * The panel state that …
-
@toppe Work is constantly being done on the TRAINING Edition. We have no problem stating if it is not as there is only one developer working the final phases of the project, and he too deserves a break like everyone else. However, we trod alo…
-
Hello Alaa, This issue has been addressed several times with several Virtual Airlines using ACARS utility. The Q400, if you were not fully aware is modeled outside of the FSX/P3D platform, so many of the parameters that would normally trigger d…