kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
@themonch I ran your scenario without issue, have you removed any NO LINKs from flight plan as this could certainly have an impact on your route segments not being acknowledged by the FMS. It may be best if you provide some video of your proced…
-
Thanks... I'll check it out in the am
-
* Are you are able to replicate the issue, if so, can you provide us with the route and steps which you took in so doing? Providing a short video clip if possible would be beneficial in helping to identify the issue (if one does exist). * What a…
-
Hello, There has been a significant amount of work that had to done to resurrect the Q400 for the x64 bit version of Prepar3D, which included replacing a number of functionalities, such as the navigational database engine, 2D panel graphics engin…
-
Good to hear that you are back on track. Thanks for the update Steve
-
Page 110 of your System Description manual will give you some insight regarding this. Cheers
-
Are you able to operate the Q400 with both addons (activesky and EZDOK) disabled?
-
Probably best if you attempt to disable each of the third party addons temporarily.... Fly the aircraft and see if you are experiencing the same issues. If you are then it would be advisable to reinstall the Q400. Accufeel, while being a great…
-
This has been an ongoing discussion for a few weeks through several other threads (some of which have possibly read). Our tasks at hand at the moment are getting the TRAINING Edition completed, any pertinent updates to the PILOT and PRO Editions wi…
-
@ollyowl Is this a recent development or has this been an issue since you began using the Q400? We have had a few reports of this issue in the past which is the reason for us providing the alternate aircraft.cfg, which usually rectifies the iss…
-
Thx ...good to hear
-
Hello, This has been a burning question among the community since the initial release of the PRO edition back in 2015. The answer unfortunately is no. Although XP has become a simulation platform that is constantly raising the bar within …
-
As far as giving it some thought - Not really, but we can have our modeler research the feasibility of this. Thanks for the suggestion. Cheers
-
Go to your SimObjects\Airplanes\mjc8q400\ini folder and open the mjc84.ini in notepad. Right at the top there should be 2 lines. ASN_INTERFACE=0 and WXAR_INTERFACE=1. Make sure the WXAR_INTERFACE is set to 0." If you are using active sky for we…
-
Interestingly this has not really been an issue or topic of discussion or problem to my recollection. We'll have to look into this. Thank you for bringing it to our attention. Cheers
-
Hello, A bit off that the SYSPAN works and not the CPAN (stranger things have happened). * Did you install the Q400 using administrative rights by right clicking on the installer and choosing "Run As Administrator"? * Are you executing bo…
-
This problem that you are experiencing is primarily due to the improper use of your rudder trim. the autopilot is compensating to keep the aircraft on course, but because the rudder trim is not correctly set the aircraft will exhibit this behavior …
-
Hello, and welcome to the forum. Might you by chance have an autosave feature activated via FSUIPC? That's has been known to cause pauses during most phases of operation for the Q400.
-
Awesome thanks Rob
-
Hi, have you reinstalled the Q400 using Administrator Rights by right clicking on the installer and running the installation using " Run As Administrator". Give that a try and keep us posted. Cheers
-
What type of sound configuration are you using? Do you have a 5.1 sound system, if so then the sound panel can be used to distribute sounds to the required speakers? If you are not using a 5.1 system then it would be best to stick with a 2.1 confi…
-
Hi Rob, Seems a bit odd regarding your FMS data as I too recently performed the AIRAC update and all appears to be working fine, but more so displaying correctly. So just to be clear your FMS is not reflecting the latest update Valid (from/to): …
-
This has been something that we have been looking into for several years, but have not gone forward in executing due to some of the limitations that were presented in the previous platforms. With P3dv4 we have seen that more is achievable and m…
-
Kindly ensure that you are using the same email used for the purchase of the Q400. If you are still having issues kindly write to us via our Support department with your credentials used when purchasing the Q400. Cheers
-
So it sounds like you are saying that all of the other LSK buttons are nonresponsive except for the main door. There were some logic issues when we first released this feature which I thought that we got sorted. One thing to note is that the d…
-
To add to that we have had some issues where users were unable to utilize SC functionality due to their Internet service provider's routers or firewalls. Unfortunately we MJC do not have a work around for this, although some users have advised that…
-
Make sure your ports are actually open. Use simple port tester for that. Cheers
-
The Q400 doe not have autoland
-
Emailing the files to our support(at) majesticsoftware(.) com email address Be sure to provide some back ground information, or even link this thread to the emailm Thanks.
-
@freddy said: You and the team may already be heading down this investigative path … but, it seems to me whenever I see this mentioned, the person is a user of FS2CREW. That said, it might pay to double check me on that via a forum search on…