kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
There have been a few issues regarding this primarily due to FDE of the aircraft being developed out simulator platform. One of the contributors to the bouncing has been the terrain mesh being set to more than 5m. Not sure how your have your s…
-
The fix needs to be applied. We will not be updating the installers until the next major patch is required. Cheers
-
http://majesticsoftware.com/forums/discussion/858/patch-for-blank-syspan-for-q400-pro-edition-p3d-v5/p1?new=1
-
http://majesticsoftware.com/forums/discussion/858/patch-for-blank-syspan-for-q400-pro-edition-p3d-v5/p1?new=1
-
The patch we released was for the PILOT Edition as there were multiple users experiencing ctds. There will be a patch available in the user area shortly for the blank panel issue for the syspan.
-
Will have another look at that but since there is nothing that is placed on that table the light does not serve a purpose as such. Assuming you are using v5, there have been changes to the light is handled and this be one of the affected modules.
-
If you are using the PILOT edition and don't not have access to the patch in the user area then kindly write to our support email with the information discussed in this thread. Cheers.
-
http://majesticsoftware.com/forums/discussion/comment/2914#Comment_2914
-
Thank you for the heads up, but allowing us to attempt to gathering data would also be helpful if you give some background on the operating system in use. recent MS updates have caused some issues with the Q400, not sure if this is one of the issue…
-
* Are you using the x64 version of the Q400 designed for P3D v4+? * Are you using the new installers for v5 or v4.5? * What version of the Q400 are you using PILOT or PRO edition? You will not see a patch in the USER AREA if the patch is not …
-
Copy... Well the same principle should apply. I do not have the controls that you do, so hopefully someone with a similar configuration could be of some assistance.
-
The majority of the CTD issues upon launch of the new installer for v5 were being experienced by Pilot edition users primarily. There are a few random CTD issues that 4.5 users are having which we have been working with on a one by one basis. …
-
As I mentioned in my previous post you will have to check with the vendor from which your purchased the Q400. A boxed version of the v5 install may not be available though. You will have to get the specifics from the respective vendor. Che…
-
Hello, Are you using the control panel to configure your input device? With the CPAN you are able to move the respective levers to the position you require the beta and reverse detents to be set by setting the values within the CPAN. T…
-
interesting.....will have to have a look at this when I bet back to the sim Thanks
-
You'll have to check with the respective vendors from which you purchased the Q400 to see if you have the correct version which will allow for the free upgrade for the version 5 installer. If you are currently not on the 64bit version of the Q400 t…
-
Are you getting the same results with ActiveSky disabled? When you were doing the SC flights did the temps indicate correctly while on the ground? One thing you can verify when using Active Sky is that your weather mode is correctly set to Liv…
-
Hello, No one is ignoring your question but it does appear that is was missed. This is an issue that we are looking it at the moment. there are a handful of users experiencing this issues and it not easily replicated on our end at this time.
-
This link may be of help...there have been several discussions regarding sound use the SEARCH function and see if one of the discussions may apply to you . Try this one for starters: http://majesticsoftware.com/forums/discussion/comment/2417#Com…
-
CPAN is the control panel for the MJC Q400. please take some time and review the manuals provided with the aircraft to get a better understanding of its functionality. Cheers
-
We did not mention or recommend a registry fix for this issue, so we are not expecting that of you!!!!!!
-
If you own the PRO edition, there is a varlist that can allow for one to assign button bindings for certain functions
-
Are you using the correct order number that is assigned to your PRO edition assuming that you were a pilot edition owned before upgrading to the PRO edition.
-
Thanks for the comments. Yes the 125 hz will still work with the PRO editions.
-
What is in the PRO is what will remain as features of the pro. I doubt at this stage in the game that we'll do something outside of what is already published unless we have a professional client asking for something specific. We need to get a m…
-
We can't speak on anything MSFS as we are not participants of the tech alpha, so we'll just have to wait and see what the platform holds in store for our future products. Too soon to speak as far as we are concerned. Cheers
-
Thanks for the update and the kind words of appreciation
-
Be sure that you are using the correct CPAN for the version of the simulator in use. Keep us posted
-
The PRO and TRAINING editions are designed for additional features. It's not likely that the PILOT edition will be getting further features added to the FMS. Kindly have a look at the product page on the Majestic Software website to see what…
-
Thanks for the heads up