kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
Ok folks give the following a try. http://majesticsoftware.com/forums/discussion/817/temporary-fix-for-prepar3d-v4-5-v5-ctds/p1?new=1
-
Attention folks.... Just a quick question for everyone who is experiencing the CTD /protection issue. Which version of the Q400 are you using please?
-
Awesome info to supplement learning the aircraft.
-
@nguindon @fogboundturtle @mifuc thanks for this additional information. Apart from the win 2004 update windows 1909 also pushed an update 2 days before we pushed the new installers and we did observed some issues forcing us to make some last minut…
-
We don't have a problem with critism and I delete what ever post I deem necessary based on your tone. It's a piece of software prone to many unknowns regardless of the Test team. Cheers
-
What type of bounce is it? One that leaps several feet in the air, or every few minutes the aircraft performs like a hop?
-
@chumley said: Round 2. Edited the Registry as suggested. Reinstalled the Dash 8. No change. Uninstalled the Dash 8 and deleted the Majestic Software folder (main key). Reinstalled the Dash 8 and started up P3D v5 with Dash 8 selected as load air…
-
The aircraft has worked without issues in Chaseplane from day one. have you disabled Chaseplane and ran the Q400 as a standalone to see if the issue still persists? If you suspect it to be Chaseplane it maybe how you have it configured, but we h…
-
Previously discussed tipic: http://majesticsoftware.com/forums/discussion/comment/1226#Comment_1226
-
> @rlaycock said: > hi > Over the years I have bought this 2 times once through fs pilots shop again through the fs pilots shop > Where can I get the download for P3D V5? > This does not seam to be a link? > FlightSim…
-
We may have to make some additional tweaks as they are different for v4 and v5
-
Have a look at the official announcement top make that determination. http://majesticsoftware.com/forums/discussion/814/majestic-softwares-q400-is-now-prepar3d-v5-ready/p1?new=1
-
@adl320 said: This thread shows [RESOLVED] it does not appear to be solved?? You should have also noticed that this was for a thread started back in 2018 where the issues were resolved. These issues are driven from a new installer driven…
-
Ah ok, good to know... Thanks for the update
-
No prob.... It will be addressed in the next update.
-
No need to do that. I asked for the simple reason that I saw something similar during an install after the win10 2004 on my laptop. Will try to see if I can replicate the issue Thanks
-
As always... Awesome work. Secret, DL was always present in the flight deck for the most part.
-
Ok, thanks. We'll look into what may be causing this issue. One other question. Are by chance running win10 2004?
-
Are you disabling your anti-virus protection?
-
This is appears to be more of a P3D v5 issue, and we don;t have much control over this as the Q400 does not have an effect on the VC textures, except for the highlighted labels around the controls, it does however affect the 2D panels, but not the VC
-
They are required to work with the Q400, yes
-
I know have been a longtime flyer of the Q400, but are noticing this with power being supplied to the aircraft. I have just done a verification check on my end (ground and in the air) and it appears to be working as it should in v4.5 HF3
-
If your installations become exhausted, its not a problem, simply send us an email to our Support with an explanation of the reason why installations became exhausted.
-
Have you attempted un-installing and re-installing the aircraft?
-
@danc444 said: I also bought mine at FlightSimStore. What do I do? Thanks. http://majesticsoftware.com/forums/discussion/94/attention-flight-sim-store-customers#latest
-
OK, thanks for the update, we'll do some additional research to try and get to bottom of this .
-
Thanks
-
We know the aircraft works, but as always thanks for the update.
-
@Maddog777 Have a look a the post previous to yous and follow those instructions please. Keep us posted
-
I know several of you have tried the re-installation process, but are you doing so by right clicking on the installer and using Run As Administrator? This is very important