kroswynd
About
- Username
- kroswynd
- Joined
- Visits
- 6,379
- Last Active
- Roles
- Member, Administrator, Moderator
- Invited by
- Boss
Comments
-
http://majesticsoftware.com/forums/discussion/94/attention-flight-sim-store-customers#latest
-
Did you by chance make any change to the timers in the cpan? Kindly provide some video or images to support the issues. Cheers
-
FSElite made that announcement based on a vendor that posted this information prematurely. Installers are being uploaded to vendors who should for the most part have them by now. Announcements will be made when appropriate. Cheers
-
Is it affecting the operation of the aircraft?
-
ANNOUNCEMENTS will be made once all vendors have the installers.
-
A/Ice is only required of your temps are below +10 and there is visible moisture and of if the ice sensors indicate ice acretion
-
Copy thank you for the information, however I have to ask? The fuel page that you show in the FMS is what you were planning to put on the aircraft, correct? However looking at your fuel gauges you are practically flying on fumes as you only…
-
There has to more to this puzzle that you are not aware of or not enlightening us about. * Maybe a route of flight flown * Planned Fuel Load (if any). Possible improper fuel loading
-
I agree the tiller axis does work well for the fslabs and PMDG aircraft. We may reconsider this but it is a low priority at this time. Cheers
-
Well if there was no icing the condition should not caused any issues with loss of airspeed, altitude or any other associated performance issues. Trying the previous scenario to see if you can replicate the issue would be interesting.
-
Depending on which weather theme is invoked within the sim icing may still occur unless your were flying with fair weather or something clear of precipitation I would try the route again and see if the issue can be repeated..
-
Your issue sounds more related to an icing induced event on either airframe or engines if the proper icing systems were not activated. Difficult to say as no one knows what conditions you were flying in. Cheers
-
Have you tried the same with TrueSky off. Suspecting that it is TrueSky as I don't know what other shader programs you may or may not be running or even how your settings are configured this could possibly be the issue.
-
You issues are not a Q400 issue per se as this is all part of LM's video card issues which hopefully should have been addressed with the recently released HF2. Our developer had similar issues upon loading the Q400 into v5 although he had a less po…
-
You will not be able to fix it. Cheers
-
Are you using P3D v5? If you we are not providing support for the playfkrm as yet. At this moment some users have no problems while other continue to have issues. Setting everything on high regardless of your specs could be the start of yo…
-
We have not pushed any update. Have you done any updates to your operating system?
-
While we are not officially supporting the platform as of yet the majority of our users have no issues with the aircraft. It would be appreciated if you informed readers of this post about the specs of your machine including the operating syst…
-
Good to know that resolved your specific issue, thank you for the heads up
-
TBH - the CPAN issue is not a big deal as such (well technically it isn't) in that it's still functional just that one basically has to make the adjustments and the RELOAD the SIMULATOR instead of reloading the aircraft. This, however, does not app…
-
We have not made a final determination regarding upgrade cost if any, at the moment, as there are few things that are being re-evaluated at the moment. HF2 is not the knight in shining amour for us at the moment as we have a few issues still …
-
I will have to look at HF3 on v4 once I get a chance to re-install it for verification. Thanks for the information regarding this.
-
Are you using P3Ds interface for binding your controls, or might you be using fsuipc? Either or is fine although fsuipc tends to offer some better precision for binding knobs, switches and axii. P3D interface with the Q400 tends to have some lag…
-
@sputnik8079 said: Hello everybody! I'm using the latest version of this product, and using prepar3d 4.5 3rd hotfix. * Sometimes, elevator or rudder doesn't work, yoke or rudder pedal is also frozen. Even tiller is frozen at…
-
Upon getting the message did you attempt to look at the CA and FO altimeters to see if they did agree/disagree? Reloading the aircraft should correct this issue, if not have a look in your mjc84. Ini and verify if the baro_sync switch is set to 1. …
-
thank you for the update
-
It is possible that due to the aircraft being slewed the aircraft logic may have sensed that the aircraft is airborne due to the slew function. Re-powering the aircraft via the batteries should allow you to re-power everything.
-
> @LineDX said: > Not officially supported for P3D v5 yet but I noticed so much orange color on displays and toggle switches. I really hope once officially supported for v5 these issues will be rectified. > Regards ???? If …
-
We will post an update when we have determined v5 will work as intended with the Q400. Since we are not providing support for v5 at this time, it would be best to advise if the solution that was recommended worked for you, as the Q400 will still wo…